12V Inteli-charger
Specification
- Fully Automatic (household Use)
- Battery Systems: 12 Volt
- Battery Capacity: 10 Ah ~ 240ah
- Charge Rate: 2~24 Amps
- Input AC : UL Version 90v~130v / CE Version 200v~260v
- 12 Volt – Deep Cycle Charge Function.
- AC Cord:(us Standard) 18 Awg(spt-2) 3C , Length-6ft./183cm
- AC Cord:(euro Standard)h05vv-f 0.75mm2/3g, Length-6ft./183cm
- DC Cord: 12 Awg(spt-3) 2C , Length-6ft./183cm
- DC Clamps: Iron, Copper-coated W/rugged jaw 100a Feature ‘switching Power Charger’ Assist the Battery Approaching its Maximum Charge Level And Increasing its Cycle Life.
- Infinite Amp Control (flexible Rate From 2A up to 24A to Meet Your Demand)
- Aluminum Housing/abs Side-housing
- 8-bit LED Display(fuzzy): It Shows the Voltage, Current & Battery Capacity
- Electronic Tact Switch Control/led Indicators
- Instrument Handle: not to Take up Much Space
- Over Temperate Protection (otp) / Over Current Protection (ocp)
- Battery Type Selection: Regular/agm,gel Cell/deep Cycle(12v Only)
- Battery Diagnosis for Abnormal Conditions (reverse Hookup, Incorrect Setting for Battery Voltage, Etc.)
- Battery Desulfurization(去硫化) / Reconditioning Assistance
- Four-stage Charge
| Charging Ability | |
| 12V | 2~24A |
| Type | |
| Auto | Yes |
| Chemistry | |
| REG. AGM M.F. | Yes |
| Gel | Yes |
| Deep cycle | Yes |
| Protections | |
| Over Charge | Yes |
| Over load | Yes |
| Over Heat ON/OFF | Yes |
| Displays | |
| Reverse & Spark Free | Yes |
| Reverse Warning | Yes |
| Charging Status | Yes |
| Charging Amp. | Yes |
| Charging Volt. | Yes |
| Tests | |
| Alternator | Yes |
Tags: C0714202, 12V Inteli-charger, Switching Power Charger, C07 Series